Table of Contents
Advertisement
E. I/O Display Mode [2]
To start I/O display mode, press '2' (keypad) and the OK key in sequence.
To select an item, press the number (keypad) and the OK key in sequence.
To delete an item, press the Clear key.
•
A press on the Copy Start key while the service mode description is being
shown starts copying operation.
No.
201
PIO input/output port of the DC controller
209
210
Master CPU input/output of the DC
controller
216
217
IPC input/output port of the DC controller
219
220
Slave CPU input/output of the DC
controller
225
226
CPU input/output port of the pedestal
controller
234
235
CPU input/output port of the DF controller
247
248
CPU input/output port of the sorter
controller
260
•
Description
Table 4-17
LED
Some of the LED lamps turn on
according to number to represent
an 8-bit input/output; see below.
Some of the LED lamps turn on
according to number to represent
an 8-bit input/output; see below.
Some of the LED lamps turn on
according to number to represent
an 8-bit input/output; see below.
Some of the LED lamps turn on
according to number to represent
an 8-bit input/output; see below.
Some of the LED lamps turn on
according to number to represent
an 8-bit input/output; see below.
Some of the LED lamps turn on
according to number to represent
an 8-bit input/output; see below.
Some of the LED lamps turn on
according to number to represent
an 8-bit input/output; see below.
2 - a
1 - a
1 - f
1 - g
1 - e
1 - d
CHAPTER 4 SERVICE MODE
Remarks
1 - b
1 - c
4-19
Advertisement
Table of Contents
