Cleaning The No.5/No.6 Mirror - Canon NP6330 Service Handbook

6

Cleaning the No.5/No.6 Mirror

a. Removing the Mirror Cleaning Tool
1) Remove the copyboard glass.
2) Remove the lens hood.
3) Remove the mirror guide plate.
4) Move the lens stage in enlargement direction.
5) Remove the screw
Use the tool for cleaning the No.5/No.6 mirror.
b. Cleaning the No.5 Mirror
1) Remove the mirror cleaning tool.
2) As shown, put the mirror cleaning tool
in the direction of the arrow to clean. (At this time, take care so that the cleaning tool
or your fingers will not touch the No.4 mirror.)
, and remove the mirror cleaning tool
Figure 2-22
Figure 2-23
CHAPTER 2 STANDARDS AND ADJUSTMENTS
against the No.5 mirror, and move the tool
.
2-21