Maintenance; Yearly; Repairs - Idex AWG ALCO POWER FIGHTER Instruction Manual

Seite 31/36 AWG | Instructions manual | Alco Power Fighter Manual Monitors
8.3
8.3.1
Carry out maintenance on the product
Operator:
Maintenance type:
Duration:
Interval:
1. Clean and then apply a thin coat of grease to all worm gear and spindle gear units. Recom-
2. On products operated with a hand lever, clean the guide for vertical movement and then ap-
3. Lubricate closed, moving parts via the lubricating nipple. Recommended lubricant: Klüber-
4. Clean piston rods of the gas springs with clear water or methylated spirits. Oil and grease
8.4
The operator should not carry out any repairs on the product Alco Power Fighter
Manual Monitors. If repairs become necessary, notify the customer service department of
AWG Fittings GmbH.
For contact data, see chapter 7.1 "Customer services" on page 28.

Maintenance

Yearly

Trained staff
Maintenance
30 min
Annually
mended lubricant: Klüberplex AG 11-461 or equivalent
ply a thin coat of grease. Recommended lubricant: Klüberplex AG 11-461 or equivalent
plex AG 11-461H or equivalent
destroy the gaskets in the gas springs!

Repairs

Servicing