Residual Risks - Idex AWG ALCO POWER FIGHTER Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Seite 13/36
AWG | Instructions manual | Alco Power Fighter Manual Monitors
2.7
Strong reaction forces
The emergence of the extinguishing agent under pressure generates strong reaction forces. Un-
controlled and hazardous movements may result if the product is incorrectly attached or at-
tached to an unsuitable surface.
 It must be ensured that the anchoring of the product will reliably absorb all forces generated.
 Serious injury caused by uncontrolled movement of the product.
Extinguishing agent emerges under high pressure
The extinguishing agent is expelled with a dangerous pressure of more than 3.5 bar. Persons
struck by the jet of extinguishing agent may be injured. Objects struck by the jet of extinguishing
agent can be hurled through the air and injure persons.
 Never aim the jet at persons.
 Never aim the jet at loose objects.
 Serious injury can be caused by the jet of extinguishing agent or objects propelled by the jet.
Stability of mobile devices
The emergence of the extinguishing agent under extremely high pressure generates strong re-
action forces. If not set up stably, the device may move uncontrollably.
 It must be ensured that the device is set up correctly at the place of use and securely an-
 Before using the equipment, check that it has been set up in a stable position. The stand tips
 The vertical swivel range limiter must be engaged. Stability cannot be guaranteed outside
 Serious injury caused by uncontrolled movement of the device.
Inadequately qualified personnel
Persons performing specific work on or with the product require special qualification.
Work on or with the product may only be carried out by personnel suitably qualified for the re-
spective tasks.
 Insufficiently qualified personnel may be injured as a result of incorrect actions.
Missing warning signs
If warning signs are missing from the product or illegible, there is no warning of a possible dan-
ger. For this reason, missing or illegible warning signs must be replaced immediately.
 Injuries may result if warning signs are missing or illegible.

Residual risks

WARNING!
WARNING!
WARNING!
chored.
must be replaced if there is flattening of more than 1.5 mm.
the limited swivel range.
WARNING!
WARNING!
Safety

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Apf 3pApf 3c hhApf 3c hrApf 2-turbofighter

Table of Contents