Using The Bluetooth ® Speaker Via Cable; Switching Between Aux-In Connection And The Bluetooth ® Connection - Silvercrest HG00595A Operation And Safety Notes

Using the Bluetooth
via cable
Note: Music playback via cable takes priority over
music playback via Bluetooth
a Bluetooth
source is therefore interrupted once the
®
jack lead
13
LED lights up green.
2
Plug one end of the jack lead into the jack and
the other into the headphones socket on an
electronic sound source (e.g. MP3 player, stereo
system).
Switch on the sound source.
If the Bluetooth
button
two beeps sound.
Start playback on the sound source and adjust
the volume to the highest possible volume. Adjust
the volume on the speaker using the
(up) or the
Start playing music on the sound source.
Switching between AUX-in
connection and the Bluetooth
connection
Aux-in connection has a higher priority over the Blue-
tooth connection as following:
®
is plugged into the jack
speaker is off, press and hold the
®
until the signal LED light green and
10
button
speaker
®
. Music playback from
®
. The signal
7
(down).
11
button
9
®
GB/MT 61