Table Of Contents; Sound Pressure Level; Uncertainty (K) : 3 Db (A); Work Mode : Sanding Vibration Emission (A ) : 3.0 M/S Uncertainty (K) : 1.5 M/S - Makita DTM41 Instruction Manual

Work mode: Scraping
Model DTM41
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Model DTM51
Sound pressure level (L
Sound power level (L

Uncertainty (K) : 3 dB (A)

Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Model DTM41
Work mode : sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DTM51
Work mode : sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DTM41
Work mode : cutting with plunge cut saw blade
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DTM51
Work mode : cutting with plunge cut saw blade
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DTM41
Work mode : cutting with segment saw blade
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DTM51
Work mode : cutting with segment saw blade
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model DTM41
Work mode : scraping
Vibration emission (a
Uncertainty (K) : 1.5 m/s
) : 78 dB (A)
pA
) : 80 dB (A)
pA
) : 91 dB (A)
WA
value (tri-axial vector
2
) : 3.0 m/s
h
2
2
) : 3.0 m/s
h
2
2
) : 7.0 m/s
h
2
2
) : 7.0 m/s
h
2
2
) : 4.5 m/s
h
2
2
) : 4.5 m/s
h
2
2
) : 5.0 m/s
h
2
Model DTM51
Work mode : scraping
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
ENG900-1
power tool can differ from the declared emission
sum) value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Multi Tool
Model No./ Type: DTM41, DTM51
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
000331
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
4
2
) : 5.5 m/s
h
2
18.7.2013
Yasushi Fukaya
Director
ENG901-1
ENH101-18