Midland G5 C User Manual page 43

Baby Sitter function
Your G5 C is equipped with the "Baby Sitter" function.
Press the MODE button till the display shows "Bp of".
Select with the scroll buttons ▲▼ the baby mode "b" or the sitter (parents)
mode "p".
To confirm, press the PTT button or wait for 5 seconds. The display will show
the selected mode and the icon .
The baby channels "b" (from b1 to b9) have the VOX with Talkback function
activated by default.
This unit set on one of these baby channels, should be placed near the baby;
while the one used for listening to the baby should be set on the sitter channels
"p" (from p1 to p9).
This unit has the automatic Out of Range function activated by default.
In the baby channels you can set the Manual Out of Range and the VOX le-
vels; in addiction to these two functions, in the sitter channels you can also set
the Automatic Out of Range.
These functions can be selected using the MODE button.
In order to have the baby-sitter function properly and correctly activated, the
2 radios should operate on the same frequency band (same channel and same
CTCSS tone, see the table below).
For example: if the radio place near the baby is set on the channel b1, the other one
used for listening to the baby should be set on channel p1.
To momentarily display the PMR446 channel and the sub-audio tone of the
Baby sitter channel, , go to the desired channel and keep pressed the ▲▼
buttons for 5 seconds.
Midland G5 C user manual | 13