Updating Hardware Flash; Updating Flash - ATTO Technology ThunderLink FC 3322 Installation And Operation Manual

For Fibre Channel Thunderbolt products, your Adapter is shipped with the latest flash and drivers but these may need to be updated as
new versions become available. Visit the ATTO website, www.atto.com, to download the latest drivers and flash bundle.

Updating Flash

Hardware flash memory may need to be updated as new
versions become available.
1. Download and install the most recent version of the
ConfigTool from the ATTO website.
2. Download the proper flash bundle (ThunderLink
Adapter specific) from the ATTO website.
a. Go to www.atto.com
b. Click on Support and then click on Downloads.
c. Register or log in if previously registered.
d. Click on Thunderbolt ThunderLink Adapters in the
left dialog.
e. Navigate to your ThunderLink Adapter model in the
right dialog and click on it.
f. Scroll down to and click the desired flash bundle
depending on the operating system.
g. A download window appears. Choose Save.
h. After the download has completed, unzip the
.zip/.dmg file based on Operating System.
Launch the ConfigTool.
3.
4. Once you've extracted the firmware file to your desktop,
open the ATTO ConfigTool network tree to localhost
and then to the Adapter that you want to update.

3 Updating Hardware Flash

On the right hand side, navigate to the Flash tab - see
5.
Exhibit 8. Here, you will be able to compare the date on
the new firmware to the date of the current firmware.
6. Browse to and open the file that you extracted to the
desktop, then click update.
7. After you are sure that any attached storage is
unmounted and disconnected, you can continue the
update process.
The status bar will give you information about the
updates in bold red text.
8. When the flash is complete, the ConfigTool application
will request a system reboot.
9. Once the computer is restarted, open the ConfigTool
again. Under the Adapter's flash tab, you'll see that the
Adapter's firmware date has been updated to reflect the
date of the file that you downloaded.
Default settings are appropriate for most systems but
you may change settings using the ATTO ConfigTool
Please refer to the ATTO Utilities Installation and
Operation Manual or contact an ATTO Technical Support Technician.
13 | P a g e