Hardware Installation - ATTO Technology Celerity FC-164E Installation And Operation Manual

You need a basic understanding of Fibre Channel before installing the Celerity FC host adapter. Please refer to
Appendix A for a list of related websites.
CAUTION CAUTION
Back up your system data before
changing or installing any hardware.
System requirements
For Celerity FC-164E only, external power cables are
also included. Please contact your ATTO authorized
sales representative if any items are missing.
To install and use the Celerity Fibre Channel host
adapter you need:
• A computer with an available PCI Express
expansion slot
• The complete Celerity FC host adapter package
Fibre Channel address
Celerity FC adapters are configured with a unique
address designated by the Institute of Electrical and
Electronic Engineers. The WorldWide Port Name
(WWN) and Node Name are the two components of
the address assigned to Fibre Channel products. This
address, stored in flash memory, allows the system to
recognize the Celerity host adapter as a unique part of
your configuration. The address is clearly marked on
the back of the board for easy identification. Please
keep a reference copy of the number in a safe place or
write in the space provided on this page.
Celerity FC host adapter WWNs are assigned for each
channel. The WWN listed on your host adapter is
assigned to the first channel (1). Sequential WWNs
apply for additional channels.
WWN 1: all adapters
WWN 2: 82EN, 84EN, 162E, 164E
WWN 3: 84EN, 164E
WWN 4: 84EN, 164E
14 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual

3 Hardware Installation

Installation
CAUTION CAUTION
Celerity FC host adapters contain
components that are sensitive to
electrostatic discharge (ESD). ESD can
cause damage to the Celerity FC host
adapter. Please follow standard methods
to avoid ESD.
1 Install the latest drivers. Refer to
2 Power down the computer and unplug the
computer from all power sources.
3 Open the case.
4 tall the Celerity FC host adapter in any open
Ins
PCI Express expansion slot. For Celerity FC-
164E only, install the appropriate external
power cable (supplied). If you have questions
about how to install an expansion card in your
system, consult your computer's
documentation.
Drawings of Celerity brackets begin on page 22
and drawings of boards begin on page 24.
CAUTION CAUTION
Celerity 16Gb Quad Fibre Channel Host
Adapters (FC-164E) require external
power supply and adequate cooling to
ensure proper system operation and
prevent data loss.
5 Connect Fibre Channel devices by inserting a
Fibre Channel cable from the devices to the
connectors on the Celerity FC host adapter until
you hear a click.
6 Close the case on the computer and power it
up.
Install Drivers.