Page 1
Package Contents UniFi Security Gateway Power Adapter (12V, 1A) Power Cord Screws (Qty. 2) Screw Anchors (Qty. 2) UniFi Controller System Requirements Microsoft Windows 8, Mac OS X, or Linux Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Java Runtime Environment 1.6 (or above) Web Browser: Mozilla Firefox, Google Chrome, Microsoft Edge, or Microsoft Internet Explorer 11 UniFi Controller software v5.4 or higher (available at: ui.com/download/unifi) Hardware Overview Ports Panel Console RJ45 serial console port for CLI management. Use a RJ45-to-DB9 serial console cable to connect the Console port to your computer.
Page 3
Resets to factory defaults. The UniFi Gateway should be powered on. Press and hold the Reset button for about 10 seconds until the right LED on the WAN 2 / LAN 2 port starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the UniFi Gateway will automatically reboot.
Page 4
System LED Click here for detailed descriptions. Power LED Power Off Green Power On Speed/Link/Act LED No Link Amber Link Established at 10/100 Mbps Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 5
Amber Flashing Link Activity at 10/100 Mbps Green Link Established at 1000 Mbps Green Flashing Link Activity at 1000 Mbps Hardware Installation Wall-Mounting (Optional) Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 6
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 7
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 8
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Software Installation Download the latest version of the UniFi Controller software at: ui.com/download/unifi From a management station connected to the same Layer-2 network, launch the installer and follow the on-screen instructions. Note: If you already have UniFi Controller v5.4 or higher installed, go to the section, Adopting the UniFi Gateway.
Page 13
and password that you created and click Sign In. You can manage your network and view network statistics using the UniFi Controller management interface. For information on using the UniFi Controller software, refer to the User Guide located on our website at: ui.com/download/unifi Adopting the UniFi Gateway 1.
Page 14
2. Locate the UniFi Gateway in the list of devices under the Model column. Click Adopt. Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...
Page 15
3. The System LED on the UniFi Gateway will turn blue to confirm that it is successfully adopted. Optional WAN Port Configuration via Layer 3 By default, the WAN port is set to DHCP so it can be assigned network settings by the service provider.
Page 16
2. Enter your Username and Password. Click Sign In. Note: If the UniFi Gateway has not been adopted by a UniFi Controller, the login window will be skipped and the Setup window will appear. 3. In the Setup window, click Edit Configuration to configure the WAN port to DHCP, Static IP, or PPPoE.
For information on using the UniFi Controller software, refer to the User Guide located on our website at: ui.com/download/unifi Specifications Dimensions 135 x 135 x 28.3 mm (5.32 x 5.32 x 1.11") Weight 366 g (12.9 oz) Networking Interfaces Serial Console Port (1) RJ45 Serial Port Data Ports (3) 10/100/1000 Ethernet Ports...
Supported Voltage Range 9 to 24VDC LEDs System Status Serial Console Port Power Data Ports Speed/Link/Activity Layer 3 Forwarding Performance Packet Size: 64 Bytes 1,000,000 pps Packet Size: 512 Bytes or Larger 3 Gbps (Line Rate) Processor Dual-Core 500 MHz, MIPS64 with Hardware Acceleration for Packet Processing System Memory 512 MB DDR2 RAM...
WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Limited Warranty ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
environment this equipment may cause radio interference. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. WEEE Compliance Statement Declaration of Conformity Online Resources Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD...