Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Ubiquiti UniFi Security Gateway XG-8
Summary of Contents for Ubiquiti UniFi Security Gateway XG-8
- Page 1 Enterprise 10G Gateway Router with DPI Model: USG-XG-8...
-
Page 2: Package Contents
Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® Security Gateway XG. This Quick Start Guide is designed to guide you through installation and also includes warranty terms. Package Contents UniFi Security Gateway XG Mounting Bracket Screws Mounting Cage Nuts Brackets (Qty. 2) (Qty. -
Page 3: Network Requirement
Network Requirement A UniFi Cloud Key or management station running the UniFi Controller software, located either on-site and connected to the same Layer-2 network, or off-site in the cloud or NOC UAP-AC-PRO UAP-AC-HD UniFi Application Server (UniFi Controller) UAP-AC-M-PRO UniFi Switch UniFi Switch USG-XG-8 Internet... -
Page 4: Hardware Overview
Hardware Overview Front Panel Ports SFP+ RJ45 microSD Console Interface Description microSD Reserved for future use. Reserved for future use. RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-DB9 serial console cable, also known as a rollover cable, to connect the Console port to your computer. -
Page 5: Front Panel Lcd Display
Front Panel System LED System State Status White Factory defaults, waiting for integration. Successfully integrated into a network Blue and working properly. Flashing White Bootup in progress. Flashing Blue Firmware upgrade is taking place. Front Panel LCD Display LCD Display 32d 1h 52m 5s WAN1 192.168.1.1... - Page 6 Section of Information Displayed Information on each SFP+ port: • Port Speed 1G or 10G Note: There are two groups of ports: ports 1-4 and ports 5-8. All ports in each group operate at the same speed. For example, if port 1 is set to 1G, then ports 2-4 will also operate at 1G.
- Page 7 Statistics Screen Statistics System Details 192.168.99.233 USG-XG THROUGHPUT BYTES PACKETS 21.3 71.8 Gbps LATENCY 12.1 1.59 Gbps CLIENTS TMP. Section of Information Displayed Statistics on uploaded (blue) and downloaded (green) data: • Throughput Total throughput speed in bps/kbps/Mbps/Gbps Statistics • Bytes Total bytes (B)* Packets...
-
Page 8: Front Panel Button
Front Panel Button Reset Button Description Resets to factory defaults. The UniFi Security Gateway XG should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until Reset the System LED starts flashing and then becomes solidly lit. -
Page 9: Back Panel
Back Panel AC/DC PSU 2 Fans PSU Module Module Bay The USG-XG-8 includes one hot-swappable AC/DC PSU module. An optional AC/DC PSU module can be installed in the PSU 2 Module Bay. You also have the option to use a DC/DC PowerModule ™... -
Page 10: Installation Requirements
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit: www.ubnt.com/toughcable WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. -
Page 11: Hardware Installation
Hardware Installation The UniFi Security Gateway XG can be placed on a horizontal surface, mounted on a wall, or mounted on a rack. WARNING: FAILURE TO PROVIDE PROPER VENTILATION MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF CLEARANCE NEXT TO THE VENTILATION HOLES FOR ADEQUATE AIRFLOW. - Page 12 3. Connect the Power Cord to the AC/DC PSU Module. 4. Connect the other end of the Power Cord to a power outlet.
- Page 13 Connecting Ethernet to LAN Connect a U Fiber 10 Gbps SFP+ optical module and fiber optic patch cable to SFP+ port 1. For detailed instructions on using SFP+ ports, refer to Using SFP+ Ports.
- Page 14 Using SFP+ Ports Note: Each SFP+ port requires a U Fiber 10 Gbps SFP+ optical module and a fiber optic patch cable. For information about compatible fiber SFP+ modules, visit: community.ubnt.com/unifi To use an SFP+ port: 1. Remove the protective plug covering the SFP+ port. 2.
-
Page 15: Initial Setup Via Bluetooth
Initial Setup via Bluetooth Use the UniFi Mobile app to configure the UniFi Security Gateway XG. 1. Download the UniFi Mobile app from the App Store (iOS) or Google Play (Android). ™ 2. Enable Bluetooth on your mobile device. 3. Launch the app and hold your mobile device within 1.5 m (5') of the UniFi Security Gateway XG. - Page 16 After you have installed the software and run the UniFi Setup Wizard, a login screen will appear for the UniFi Controller management interface. Enter the Admin Name and Password that you created in the UniFi Setup Wizard. Then click Login. You can manage your network and view network statistics using the UniFi Controller management interface.
- Page 17 1. From a web browser, go to: https://setup.ubnt.com https://setup.ubnt.com 2. The UniFi Security Gateway XG Settings window will appear. Click Configuration to continue. 3. In the Configuration window, configure the WAN Settings, LAN Settings, and Inform URL as needed. 4. Click Apply Changes to save the changes.
- Page 18 Adopting the UniFi Security Gateway XG 1. From the UniFi Controller dashboard, click Devices in the left menu bar. 2. On the Devices screen, locate the UniFi Security Gateway XG in the list of devices under the Model column. To adopt it, click Adopt. 3.
-
Page 19: Specifications
Specifications USG- XG-8 Dimensions 442.4 x 285.6 x 43.7 mm (17.42 x 11.24 x 1.72") Weight 4.435 kg (9.78 lb) With Mount Brackets 4.535 kg (9.98 lb) Max. Power Consumption AC/DC 100W Power Supply (2) Hot-Swappable AC/DC or DC/DC 100W PSU (1 AC/DC PSU Included) Supported Voltage Range 100 - 240VAC... -
Page 20: Safety Notices
Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. -
Page 21: Limited Warranty
Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation;... -
Page 22: Limitation Of Liability
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. - Page 23 Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you.
-
Page 24: Rf Exposure Warning
ISED Canada CAN ICES-3(A)/NMB-3(A) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and This device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (IC: 6545A-USGXG) has been approved by ISED Canada. -
Page 25: Rohs/Weee Compliance Statement
RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. -
Page 26: Declaration Of Conformity
на ЕС декларацията за съответствие може да се намери на следния интернет адрес: www.ubnt.com/compliance Hrvatski [Croatian] UBIQUITI NETWORKS ovime izjavljuje da je radijska oprema tipa USG-XG-8 u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi: www.ubnt.com/compliance Čeština [Czech]... - Page 27 Íslenska [Icelandic] Hér með lýsir UBIQUITI NETWORKS yfir því að USG-XG-8 er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi: www.ubnt.com/compliance...
-
Page 28: Online Resources
Español [Spanish] Por la presente, UBIQUITI NETWORKS declara que el tipo de equipo radioeléctrico USG-XG-8 es conforme con la Directiva 2014/53/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: www.ubnt.com/compliance...