Next steps
1. Replace the
base cover
2. Replace the
SD memory card
3. Follow the procedure in
Hard drive
Removing the hard drive assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Disconnect the
battery
Steps
1. Disconnect the hard drive cable from the system board [1].
2. Peel the tape that secures the hard drive cable to the system board [2].
3. Remove the four (M2x4.5) screws that secure the hard drive assembly to the palmrest and keyboard assembly [1].
4. Lift the hard drive from the slot on the palmrest and keyboard assembly [2].
after working inside your computer
before working inside your computer
cable.
Removing and installing components
27