Next steps
1. Replace the
WLAN
2. Replace the
battery
3. Replace the
base cover
4. Replace the
SD memory card
5. Follow the procedure in
Camera
Removing the camera
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
base cover
4. Disconnect the
battery
5. Remove the
WLAN
6. Remove the
display assembly
7. Remove the
display bezel
8. Remove the
display panel
Steps
1. Using a plastic scribe, gently pry the camera off the display back-cover [1].
2. Disconnect the camera cable from the camera module [2].
3. Lift the camera module from the display back-cover [3].
108
Removing and installing components
after working inside your computer
before working inside your computer