Touchpad - Dell Latitude 3400 Service Manual

Next steps
1. Replace the hard drive
NOTE: Required for systems with 42 Whr battery
2. Reconnect the battery.
3. Replace the base cover.
4. Replace the SD memory
5. Follow the procedure in

Touchpad

Removing the touchpad assembly
Prerequisites
NOTE: For information only, touchpad is included with the palmrest assembly.
1. Follow the procedure in
2. Remove the SD memory
3. Remove the base cover.
4. Disconnect the battery.
Steps
1. Remove the three (M2x2) screws that secure the touchpad bracket to the palmrest and keyboard assembly [1].
2. Lift the touchpad bracket off the palmrest and keyboard assembly [2], and peel the tape that secures the bracket to the
palmrest.
3. Open the latch and disconnect the touchpad cable from the system board [1].
4. Peel the tape that secures the touchpad to the palmrest and keyboard assembly [2].
assembly.
card.
after working inside your
before working inside your
card.
computer.
computer.
Removing and installing components 35