Next steps
1. Reconnect the
battery
2. Replace the
base cover
3. Replace the
SD memory card
4. Follow the procedure in
VGA daughterboard
Removing the VGA daughterboard
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory
3. Remove the
base
cover.
4. Disconnect the battery.
Steps
1. Disconnect the VGA daughterboard cable from the system board [1].
2. Unroute the VGA board cable from the routing guides on the fan [2].
72
Removing and installing components
after working inside your computer
before working inside your
card.
computer.