Selecting A Pre-Programmed Sound Field - Sony STR-DG600 Operating Instructions Manual

Multi channel av receiver

Hide thumbs Also See for STR-DG600:

Table of Contents

Enlarged version

If you connect a sub woofer

This receiver will generate a low frequency

signal for output to the sub woofer when there

is no LFE signal, which is a low-pass sound

effect output from a sub woofer to a 2 channel

signal. However, the low frequency signal is

not generated for "NEO6 CIN" or "NEO6

MUS" when all speakers are set to "LARGE".

Notes

• This function does not work when MULTI CH IN

or ANALOG DIRECT is selected.

• DTS Neo:6 does not work for DTS 2CH audio, the

sound is played as 2 channel.

• Dolby Pro Logic IIx decoding does not function for

DTS format signals or for signals with a sampling

frequency of more than 48 kHz.

Tip

When a multi channel signal is input, only Dolby

Pro Logic IIx decoding is effective. When you select

decoding modes other than Dolby Pro Logic IIx,

multi channel sound (being encoded) is output.

Selecting a pre-

programmed sound field

You can take advantage of surround sound

simply by selecting one of the receiver's pre-

programmed sound fields. They bring the

exciting and powerful sound of movie theaters

and concert halls into your home.

2CH

A.F.D.

2CH

Chapters

Table of Contents