Component - Sony STR-DG600 Operating Instructions Manual

TV monitor etc., INPUT jack
Receiver MONITOR OUT jack
Receiver INPUT jack
Video component OUTPUT jack
Notes
• Connect image display components such as a TV
monitor or a projector to the MONITOR OUT jack
on the receiver.
• Turn on the receiver when the video and audio of a
playback component are being output to a TV
through the receiver. If the power supply of the
receiver is not on, neither video nor audio is
transmitted.
Converting video signals
This receiver is equipped with a function for
converting video signals. You can output the
video signal after connecting this receiver via
the MONITOR OUT jack as shown in the
illustration.
Video signals can be output as S-video signals
and this upconverted video signals can only be
output from the S-video MONITOR OUT
jack.

COMPONENT

VIDEO S-VIDEO
COMPONENT
VIDEO S-VIDEO
Signal
processing
COMPONENT
VIDEO S-VIDEO
COMPONENT
VIDEO S-VIDEO
High quality image
Note on converting video signals
When video signals from a VCR, etc., are
converted on this receiver and then output to
your TV, depending on the status of the video
signal output, the image on the TV screen may
appear distorted horizontally or no image may
be output.
Reassigning video input signals
to another input
Component video input signals can be
reassigned to another input (page 71).
VIDEO
VIDEO
VIDEO
VIDEO
23
US