7
Operating
7.1 Starting the device
7.2 Operating on the unit
Navigate in the menuI
Connect the device to the power supply to start operation. The display shows the current
operating mode, the version and the temperature. The device is operational.
The display gets locked automatically if no key is pressed during 30 seconds. Press [MODE] and
[SET] simultaneously for 3 seconds to unlock the display manually.
1.
Press [MODE] to activate the main menu.
2.
Use [UP] or [DOWN] to select the desired parameter or to change the respectively dis‐
played value. Press [SET] to apply settings and changed values.
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR
Operating
31