Table of Contents
Advertisement
7
Operating
7.1 Main menu
DMX address
1.
Press [MENU] to activate the main menu.
2.
Use [UP] or [DOWN] to select the desired parameter or to change the respectively dis‐
played value.
3.
When the display shows the desired parameter or value press [ENTER] to enter the
respective submenu or to confirm a new value.
4.
To return to the previous menu level without changes, press [MENU].
1.
Press [MENU] to activate the main menu.
2.
Use [UP] or [DOWN] until the display shows 'Address' and confirm with [ENTER].
3.
Use [UP] or [DOWN] to select a value between 'Add: 001' and 'Add: 512' to set the
desired DMX address and confirm with [ENTER].
Make sure that this number matches the configuration of your DMX controller. This set‐
ting is only relevant when the device is controlled via DMX.
4.
To return to the previous menu level without changes, press [MENU].
2Bright Expo 575 WW, 2Bright Expo 575 CW
LED Spotlight
Operating
21
Advertisement
Table of Contents
