Do you have a question about the ELEMENT READY M5-800X4 and is the answer not in the manual?
Questions and answers
Mike Howell
April 28, 2025
Wiring configuration for the M5-800X4 To make a two channel 400 watt for connection to two speakers
1 comments:
Mr. Anderson
May 15, 2025
To configure the Rockford Fosgate M5-800X4 as a two-channel 400-watt amplifier for two speakers, use the bridged mode at 4 ohms. Connect:
- Channel 1 and Channel 2 bridged for one speaker (positive from Channel 1, negative from Channel 2) - Channel 3 and Channel 4 bridged for the second speaker (positive from Channel 3, negative from Channel 4)
Each bridged pair will deliver 200 watts at 4 ohms, totaling 400 watts across two channels.
This answer is automatically generated
Related Manuals for Rockford Fosgate ELEMENT READY M5-800X4
Page 4
How to adjust 2 channel mode or 4 channel mode on M5-1500X5 The M5-1500x5 comes in 2 channel mode. 1. Using the included 3mm wrench, remove the 2 screws holding the input wire harness on the control panel side of the amp. 2.
A 0.5” (12.5mm) nozzle with 15 psi (100 kPa) outputting 100 liters per min of water from a distance of 9.8’ (3 meters) from all directions for at least 3 minutes. CTA 2006 Power ratings on Rockford Fosgate amplifiers conform to CTA-2006 industry standards. These guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated marketing ratings.
This warranty covers only the original purchaser of Rockford product purchased from an authorized Rockford Fosgate dealer in the United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and date of purchase.
Need help?
Do you have a question about the ELEMENT READY M5-800X4 and is the answer not in the manual?
Questions and answers
Wiring configuration for the M5-800X4 To make a two channel 400 watt for connection to two speakers
To configure the Rockford Fosgate M5-800X4 as a two-channel 400-watt amplifier for two speakers, use the bridged mode at 4 ohms. Connect:
- Channel 1 and Channel 2 bridged for one speaker (positive from Channel 1, negative from Channel 2)
- Channel 3 and Channel 4 bridged for the second speaker (positive from Channel 3, negative from Channel 4)
Each bridged pair will deliver 200 watts at 4 ohms, totaling 400 watts across two channels.
This answer is automatically generated