H3C S12500X-AF Series Hardware Reference Manual page 12

Section Location identification
No cards, fan trays, or power modules are provided with the switch. Order them as required. For the
cards, fan trays, and power modules available for the switch, see "FRUs and compatibility matrixes."
Table 2 describes the slot arrangements for FRUs.
Table 2 FRU slots on each switch model
Model MPU
S12516X-AF Slots 0 and 1
S12512X-AF Slots 0 and 1
S12508X-AF Slots 0 and 1
S12504X-AF Slots 4 and 5
S12502X-AF Slots 0 and 1
S12501X-AF N/A
Installation description
•
•
Before you remove a switching fabric module, remove
the fan tray that covers it.
Switching fabric
LPU
module
Slots 18 to 23
Slots 18 to 20 are covered
Slots 2 to 17
by FAN 1. Slots 21 to 23 are
covered by FAN 2.
Slots 14 to 19
Slots 14 to 16 are covered
Slots 2 to 13
by FAN 1. Slots 17 to 19 are
covered by FAN 2.
Slots 10 to 15
Slots 10 to 12 are covered
Slots 2 to 9
by FAN 1. Slots 13 to 15 are
covered by FAN 2.
Slots 6 to 11
Slots 6 to 8 are covered by
Slots 0 to 3
FAN 1. Slots 9 to 11 are
covered by FAN 2.
Slots 2 and 3 N/A
Slot 0 N/A
6
installation. For an LSXM1TGS24FX1 LPU to
start up correctly, install a minimum of one
switching fabric modules in the three
lowest-numbered switching fabric module slots.
To use an LSXM1TGS48C2HB1,
LSXM1TGS48HB1, LSXM1TGS48HF1,
LSXM1CGQ6QGHB1, LSXM1CGQ6QGHF1, or
LSXM1TGS24QGMODHB1 LPU, the three
highest-numbered switching fabric module slots
take precedence over other slots for module
installation. For the LPU to start up correctly,
install a minimum of one switching fabric modules
in the three highest-numbered switching fabric
module slots.
To use an LSXM1QGS24HB1,
LSXM1QGS36HB1, LSXM1TGS48QGHA1, or
LSXM1TGS24CGMODHD1 LPU, the four
highest-numbered switching fabric module slots
take precedence over other slots for module
installation. For the LPU to start up correctly,
install a minimum of one switching fabric modules
in the four highest-numbered switching fabric
module slots.
Power
module
PWR 1 to
PWR 16
PWR 1 to
PWR 12
PWR 1 to
PWR 8
PWR 1 to
PWR 4
PWR 1 to
PWR 4
PWR 1 and
PWR 2
Fan tray
FAN 1 and
FAN 2
FAN 1 and
FAN 2
FAN 1 and
FAN 2
FAN 1 and
FAN 2
FAN 1 and
FAN 2
FAN 1 to
FAN 3