Section 9-Periodic Maintenance Guidelines; Initially - Invacare Action 1 R Service Manual

SECTION 9— PERIODIC MAINTENANCE GUIDELINES
S E C T I O N 9 — P E R I O D I C M A I N T E N A N C E
G U I D E L I N E S
NOTE: Always clean the wheelchair before any inspection/adjustment. Regular
cleaning will reveal loose or worn parts and enhance the smooth operation of the
wheelchair.
Initial Inspection:
Initial adjustments should be made to suit the personal body structure needs and preferences of
the user:
Inspect/Adjust Initially
Wheelchair rolls straight (no excessive drag or pull to one side).
Ensure all hardware is tight (see page 6).
All fasteners on clothing guards are secure.
Arms are secure but easy to release and locking systems engage properly.
Adjustable height arms operate and lock securely.
Armrest armpad sits flush against arm tube.
Seat and/or back upholstery have no rips.
Inspect adjustable angle back attaching hardware is securely tightened.
Ensure hand grips are secure to backrest canes.
Sealed bearings and axle nut tension are correct.
No excessive side movement or binding when rear wheels are lifted and spun.
Quick-release axles lock properly (see page 17).
Inspect handrims for signs of rough edges or peeling finish.
Inspect for broken spokes.
Wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.
Wheel bearings are clean and free of moisture.
Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
Ensure all castor/wheel/fork/head tube fasteners are secure (see pages 6 & 20).
Wheel brakes do not interfere with tires when rolling.
Wheel brakes pivot point are free of wear and looseness.
Wheel brakes are easy to engage.
Inspect tires/castors for flat spots and wear.
Check pneumatic tires for proper inflation (recommended tire pressure is listed on the side wall of the tire).
Ensure axles are free from dirt, lint, etc.
Ensure roller bearings are free from dirt, lint, etc.
Adjust wheel brakes as tires wear.
Clean and wax all parts.
Clean upholstery and armrests.
Ensure castors are free of debris.
3 1