Invacare Action 1 R Service Manual page 17

Brake Hardware
Fixed Axle
NOTE: In order to obtain the desired front seat to floor height (for details, see Seat-to
Floor Height paragraph), it will be necessary to perform both of the following:
• Changing the mounting position on the fork. Refer to
Removing/Installing/Repositioning the Castor Assemblies paragraph.
• Changing the rear height positioning. Refer to Changing Seat-to-Floor Height
paragraph, see table and figure 6.1.
SECTION 5—REAR WHEELS/FRONT CASTORS
Transit Brake
FIGURE 5.1 Removing/Installing Rear Wheels
1 7
Axle Brackets
Hardware
Axle Bracket
Locknut
Washers