LED
1000
FDX
ACT
CR
MJ
MN
DSLx
Status
Explanation
Green
The speed for Ethernet is 1000Mbps when LNK
LED is on.
OFF
The speed for Ethernet is 10/100Mbps when LNK
LED is on.
Green
The Ethernet is in full duplex mode when LNK LED
is on.
OFF
The Ethernet is in half duplex mode when LNK
LED is on.
Green
Blink: DSL board is Active.
OFF
It will be off or solid on when the system is inactive.
Red
DSL critical alarm is present.
OFF
No critical alarm is present to system.
Red
DSL major alarm is present.
OFF
No major alarm is present to system.
Yellow
DSL minor alarm is present.
OFF
No minor alarm is present to system.
Green
The DSL x port link status is up.
Blinking
The DSL link is training.
OFF
The DSL x port link status is down.
VigorAccess Installation Guide
13