Walrus Systemflo SLB-C Series Installation And Operation Manual page 2

SLB-C, SLB-S, SLB-N
1. Model numbering and nameplate format
1.1 Model numbering
Example: SLB-C, SLB-S, SLB-N
1.2 Nameplate format
1. Pump Type–Seal Type
2. Pump Model
3. Frequency
4. Rated Power
5. Speed
6. Maximum Head
7. Capacity
8. Head Range
9. Maximum Operating Pressure
10. Rotating Direction
11. Serial Number
2. Handling
Read these instructions carefully before beginning installation.
Lift and handle these pumps carefully.
SLB-C, SLB-S, SLB-N series are vertical multi-stage non-self priming pumps coupled with standard electric motors.
This manual applies to standard version pumps and for standard applications.
Contact your supplier or the factory for information about special pump versions and applications.
3. Application
SLB-C, SLB-S, SLB-N series in-line pumps are designed for a wide range of applications in various industries–water treatment,
water boosting, water supply, cooling, cleaning, etc.
3.1 Pumped liquids
The pumps are designed for use with clean, non-explosive liquids that do not contain abrasive material.
These pumps are not designed to be used with abrasive, solid containing, explosive and corrosive liquids. For special appli-
cation, please contact your supplier or the factory.
5 16 SQQE
Code for shaft seal
Number of stages
Nominal flow(m3/h)
Type ranges