EC Declaration of Conformity Manufacturer: Walrus Pump Co., Ltd. Address: No.83-14, Dapiantou, Sanzhi Dist., New Taipei City 252, Taiwan Declare that the machinery described: Name : Water Pump Model : TPRK Series Conform to the following directive: 2006/42/EC—Machinery directive 2014/35/EU—Low voltage directive 2014/30/EU—EMC (Electromagnetic compatibility) directive...
4. Installation Please read this installation and operating instructions carefully The pump has hot surface on the before beginning installation and motor. It must be installed so that operation. persons cannot accidentally come 1. Application into contact the hot surface. 4.1.
Please following: carefully follow all instructions in the 6.1.1 All piping joints are completely manual as Walrus may refuse to accept tightened. Leakage in piping may the contaminated pump for servicing. cause the pump hydraulic loss.
Page 8
12. Fault nding (Make sure electricity supply has been switched o before trouble shooting) Fault Cause Remedy Connect the electricity supply. Supply failure. Fuses are blown. Replace fuses. Motor starter overload has tripped out. Reactivate the motor protection. 1. Motor does not Thermal protection has tripped out.
Page 9
Connecting parts drawing Coupling adjustment ~ 8 ~...