Walrus Systemflo SLB-C Series Installation And Operation Manual page 8

Vertical multistage centrifugal pump
Table of Contents

Advertisement

SLB-C, SLB-S, SLB-N
7.1 Operation
¾ It is recommended to open the bypass valve during start-up. The bypass valve that connects the suction and discharge of the
pump will make the filling procedure easier. When the operation is stable, the bypass valve can be closed.
¾ If the pumped liquid contains air or the operating pressure is lower than 6 kg/cm², it is advisable to leave the bypass valve
open. If the operating pressure constantly exceeds 6 kg/cm², the bypass valve must be closed. Otherwise, the material at the
opening will be worn out because of the high liquid velocity.

Advertisement

Table of Contents
loading

Related Products for Walrus Systemflo SLB-C Series

This manual is also suitable for:

Systemflo slb-s seriesSystemflo slb-n series

Table of Contents