Fritz! Box 6660 Cable Configuration And Operation page 201

User Interface: System Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3.
4.
5.
Step 6 is not needed if you configured the "Save Settings" push service.
Note
In this case start with step 7.
6.
7.
8.
The FRITZ!OS update begins and the "Info" LED starts flashing. The
FRITZ!OS update is complete when the "Info" LED stops flashing.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
FRITZ!Box 6660 Cable
The complete model name of your FRITZ!Box is shown in the
user interface on the „Overview" page and on the bottom of the
housing.
Download the file with the file extension „.image" to your com-
puter.
Open the user interface;
Select „System / Update / FRITZ!OS File".
Save the settings of your FRITZ!Box before the update. Using this
file you can restore the settings of your FRITZ!Box as needed.
– Enable the option "Create a backup file before the update".
– Assign a password for the encryption of your backup file.
– Perform the additional confirmation and click on "OK".
– Save the backup file.
Click on the „Browse..." button and choose the file with the new
FRITZ!OS you already downloaded and saved on your computer.
Click on „Start Update".
see page 55.
201