Selecting The Weight Unit; Saving Personal Data - Medion MD 11540 Manual

S
AVING PERSONAL DATA

Selecting the weight unit

You can change the weight unit for only one measurement or permanently.
Changing the weight unit before weighing
– Put a little weight on the scale by pushing your hand on the weighing area
(don't stand on the scale). "- - - -" is shown in the display.
– Push SET to choose the desired unit kg, lb or St.
– Stand on the scale.
Setting the weight unit permanently
– Choose memory space 12 (as shown in the following chapter).
– Set the desired weight unit in memory space no. 12. Settings made in this
memory space is the main preference for the scale.

Saving personal data

The scales interpret your body fat, water and muscle values on the basis of your
personal data. Therefore you have to enter your personal data before measuring
your muscle mass, body fat and water. Twelve memory spaces are provided for
this.
The personal data is: height, age, sex, body structure and weight unit. If there is
no input within 15 seconds, the scales turns off itself.
Entering personal data:
– Press the button
– Use the or
SET..
The display now switches to age.
10
. The body height flashes on the display.
buttons to select the height in cm and confirm by pressing