Euroflex SC4X2 AUS Instruction Manual page 8

WARNING:
attaching an accessory to the unit.
DETAIL NOZZLE & ACCESSORIES
A. Attach Nylon or Brass Detail Brush to Detail Nozzle
The Nylon Detail Brush is best for
cleaning tile, ceramic and marble.
Brass Detail Brush is best for metal.
To use: Push the Nylon/Brass Detail
Brush on the end of the Detail Nozzle.
(Detail Nozzle should be connected
to the Steam Gun or Extension Tubes.)
B. Attach Scraper to Detail Nozzle
The Scraper is best for removing small
amounts of wallpaper and also anything
that can be scraped from a flat surface,
e.g., grease deposits in an oven. It is also
useful when defrosting freezers.
To use: Push the Scraper on the end of the Detail Nozzle. (Detail Nozzle
should be connected to the Steam Gun or Extension Tubes.)
C. Attach Grout Brush to Detail Nozzle
The Grout Brush is designed to clean
the grout in between tile. Use on floors,
backsplashes, counters and in shower.
To use: Push the Grout Brush on the end
of the Detail Nozzle. (Detail Nozzle should
be connected to the Steam Gun or
Extension Tubes.)
The Blind Cleaner will need to be attached
to the Detail Nozzle WITHOUT it's tip.
Remove Tip by pulling it off the body.
D. Attach Blind Cleaner to Detail Nozzle
The Blind Cleaner must be used with a Microfiber Pad (See next page for Pad
placement instructions). It is perfect for cleaning between slats of wood, vinyl
and metal blinds.
To use: Push the Blind Cleaner on
the end of the Detail Nozzle. (Detail
Nozzle should be connected to the
Steam Gun or Extension Tubes.)
8
Cleaner Accessories
Always ensure steam trigger is off and not steaming when
*
CLICKS to
lock in place.
*
CLICKS to
lock in place.
*
CLICKS to
lock in place.
*
CLICKS to
lock in place.