Euroflex SC4X2 AUS Instruction Manual page 10

WARNING:
attaching an accessory to the unit.
CARPET GLIDE and CARPET PAD
The Carpet Glide clips over the base of the Floor Brush allowing the Floor
Brush to glide over carpets, making steaming much smoother and easier.
Before attaching the Carpet Glide to the Floor Brush a Carpet Pad should
be attached to the Carpet Glide.
A. Attach Carpet Pad to Carpet Glide
The Carpet Pad absorbs excess moisture produced by the Steamer,
preventing carpet from getting overly damp.
1. Position Carpet Glide
with Tabs facing up.
2. Place Carpet Pad in
the Carpet Glide.
3. Be sure Carpet Pad
is seated under the
Holding Tabs.
ATTACH CARPET GLIDE TO FLOOR BRUSH
1. Attach Floor Brush to the Carpet
Glide (with Carpet Pad facing up).
Use Holding Tabs on Carpet Glide
to lock the Floor Brush in place.
10
Cleaner Accessories
Always ensure steam trigger is off and not steaming when
HOLDING TABS
2. This is how the Floor Brush
should look with Carpet
Glide attached.