Introduction - Jet MT Series Operating Instructions Manual

3.0 Introduction

This manual is provided by JET covering the safe operation and maintenance procedures for a JET MT Series
Electric Trolley. This manual contains instructions on installation, safety precautions, general operating
procedures, maintenance instructions and parts breakdown.
The JET MT trolley ranges from 1/2 ton to 5 ton and is designed to pair with a TS series JET hoist. The trolley
is made of thick steel elements, including side plates, wheel axles, suspension bolts, and center load plate.
Wheels are hot-forged steel, and hardened steel comprises the gears and pinion, which is driven by a planetary
gear reducer. Extensions are available to accommodate the width of most beam flanges.
This machine has been designed and constructed to provide consistent, long-term operation if used in
accordance with instructions set forth in this manual. If there are any questions or comments, please contact
either your local supplier or JET. JET can also be reached at our web site: www.jettools.com.
Record your purchase information here for quick reference:
Model No.:
Purchased From:
Date Installed:
Stock No.:
Installer:
4
Serial No.:
Date Purchased: