Logging On To Console; Configuring Ip Address - Planet GS-5220 Series Quick Installation Manual

3.1 Logging on to Console

Once the terminal is connected to the device, power on the Managed Switch and
the terminal will display "running testing procedures".
Then, the following message asks to log in user name and password. The factory
default user name and password are shown as follows and the login screen in
Figure 3-3 appears.
Username: admin
Password: admin
Figure 3-3: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
description of the commands, please refer to the following chapters.
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
Note
face.
3.2 Configuring IP Address
The Managed Switch is shipped with default IP address shown below.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follows:
7