Summary of Contents for Happybeds Houston Wooden 1 Drawer Bedside Table
Page 1
Assembly Instructions Title of Product Houston Wooden 1 Drawer Bedside Table Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Vendor: S000350 ASSEMBLY INSTRUCTIONS HOUSTON 1 DRAWER BEDSIDE IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR USE YOUR HOUSTON 1 DRAWER BEDSIDE . PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. ASSEMBLY: Assembly should be carried out with this item laying flat, not standing upright. Assemble on a soft, clean surface to prevent damages.
Page 4
Vendor: S000350 Parts List Hardware List Part Descripion Part Description Top panel Cam lock Bottom panel Minifix screw Side panel ( Left ) Plastic cap Side panel ( Right ) M8 x 30mm Wood Dowel Back panel M6 x 50mm CSK Cap Wood screw Drawer front Allen key M4 Drawer side...
Page 5
Vendor: S000350 Step 1: Prepare these parts for assembly using hardware parts A1, A2, B, E and J1. DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 2: Attach side panel (3) and (4) to top panel (1) using hardware A1 and A2 with a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 6
Vendor: S000350 Step 4: Attach bottom panel (2) to side panel (3) and (4) using hardware C and D. DO NOT use any power tools as this may damage the frame and will invalidate any claim. C x 4 Step 5: Attach hardware I1 into top panel (1), bottom panel (2), side panel (3) and (4) using hardware I2 with a screwdriver (not provided).
Page 7
Vendor: S000350 Step 6: Attach metal frame (10) to metal bone (11) using hardware D and H. DO NOT use any power tools as this may damage the frame and will invalidate any claim. H x 8 Step 7: Attach metal frame (10) to bottom panel (2) using hardware D and G. DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor: S000350 Step 8: Attach the Drawer Front (6) and drawer back (8) to 1x drawer side (7) using hardware F then slide in the drawer bottom (9) and attach the other drawer side (7) using hardware F. Attach the hardware J2 to the drawer sides (7) using hardware E. DO NOT use any power tools as this may damage the frame and will invalidate any claim.
If this is not adhered to, it could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...