Notices - Honeywell OW-FDAP31 Manual

6 FDAP MAINTENANCE AND TROUBLESHOOTING

9 Notices

The externally mounted antenna has a surface resistivity greater than 1Gohm per square. When the FDAP is
installed in potentially hazardous locations care should be taken not to electro-statically charge the surface of
the antenna shroud by rubbing the surface with a cloth, or cleaning the surface with a solvent. If electro-
statically charged, discharge of the antenna to a person or a tool could possibly ignite a surrounding hazardous
atmosphere.
Other trademarks
Microsoft and SQL Server are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Trademarks that appear in this document are used only to the benefit of the trademark owner, with no intention
of trademark infringement.
Third-party licenses
This product may contain or be derived from materials, including software, of third parties. The third party
materials may be subject to licenses, notices, restrictions and obligations imposed by the licensor. The licenses,
notices, restrictions and obligations, if any, may be found in the materials accompanying the product, in the
documents or files accompanying such third party materials, in a file named third_party_licenses on the media
containing the product, or at https://www.honeywell.com/en-us/privacy-statement
84 www.honeywell.com