Configuring And Viewing The Modbus Registers - Honeywell OW-FDAP31 Manual

5.7

Configuring and Viewing the Modbus Registers

To configure the Modbus Registers:
1. On the Selection Panel, select the FEWIO.
2. Expand the FEWIO and select the Modbus Register Config option
o
Byte Order: Select a byte order that matches the expected byte order of the Modbus client.
Options include: Big Endian, Little Endian, Big Endian Bytes Swapped, and Little Endian
Bytes Swapped.
51