Mount The Fdap1/Fdap2; Pole Mounting - Honeywell OW-FDAP31 Manual

3 FDAP INSTALLATION
3.10

Mount the FDAP1/FDAP2

The assembled
its site location. The
appropriate optional mounting kit that is available with the unit.

3.10.1 Pole mounting

When pole mounting the
mounting kit includes the following items:
(1) Mounting plate
(2) U-bolts with nuts
(3) Screws (to attach the
The pole mounting kit comprises of mounting plate, U-bolts, and nuts as displayed in "Figure 5: Pole
mounting". When using the mounting plate for the pole installation, secure the
using the screws supplied with the bracket kit. The
the pole using the same mounting hardware. It can also be mounted in line with the pole. However, if the
integral antennas are too close to the pole, it might cause RF communication problem. For inline mounting,
the
FDAP1/FDAP2
28 www.honeywell.com
, along with antennas and lightning suppressors (if required) can be mounted in
FDAP1/FDAP2
enclosure can be mounted on a 2-inch pole or on a wall using the
FDAP1/FDAP2
, you can assemble and install the mounting hardware at the site. The
FDAP1/FDAP2
to the mounting plate)
FDAP1/FDAP2
integral antennas should be on the top of the mounting pole.
can be mounted to the left or to the right of
FDAP1/FDAP2
Figure 5: Pole mounting
to the bracket
FDAP1/FDAP2