Provision An Fdap - Honeywell OW-FDAP31 Manual

4.2

Provision an FDAP

The FDAP should be given a unique authentication key to associate it with the wireless network in which it is
installed and operated. The authentication keys are generated and managed by the WDM. You can provision an
FDAP using over-the-air provisioning or using a Provisioning Handheld device. A Provisioning Handheld
device is used to upload the authentication keys from the WDM to the Provisioning Handheld device, and then
download the keys to FDAPs using IR media. You can send provisioning information (security, wireless) from
Provisioning Handheld device to the FDAP using IR communication link. Once the unit is set up and the
authentication is completed, the FDAP joins the network and starts communicating.
Attention
Before provisioning an FDAP, ensure that you have configured the WDM using the First Time Configuration Wizard
and the authentication keys are transferred to the Provisioning Handheld device from the WDM.
For more information about the procedure to provision an FDAP, refer to the Wireless Device Manager User's
Guide.
4 FDAP CONFIGURATION
33