Minipool Functions - treesse Phantom PR1 Operating And Maintenance Manual

Use
2

MINIPOOL FUNCTIONS

1 - Control panel
2 - Skimmer edge
3 - Pillow
4 - GHOST whirlpool
5 - PLUS whirlpool
6 - Seat blower (optional)
7 - Filling / draining plate
8 - Filter / air regulator compartment
The minipool must ALWAYS remain connected to both the electrical grid and plumbing (filling and draining): this is
necessary for filtering, cleaning the filters and maintaining the minipool's water levels and temperature.
ALWAYS cover the minipool when inactive. This protects it from the sun's rays, prevents dirt from accumulating
inside the bathtub and keeps it from losing heat, thus optimising the efficiency of the heater.
FILLING THE MINIPOOL
Pressing the key provided on the control panel starts
the filling. This occurs through a concealed spout in
the compartment on the bottom of the minipool and is
indicated by the illuminated blue LED.
First, the compensation tank is filled, and then - once
the water has reached the maximum level inside the
tank - the bathtub is filled through a recirculation pump,
passing through the paper filter and the heater.
After reaching the correct level, the system automati-
cally stops the filling and makes available the functions
of whirlpool, recirculation, ozone and heater.
During use of the minipool, the system automatically
maintains the water level flush with the skimmer edge
of the pool.
EN EN
minipool minipool
2
5
4
7
26∞
Automatic filling using the keypad: pressing the key activates the
automatic filling of the minipool, controlled by two level sensors.
11 11
Phantom PR1 Phantom PR1
4
3
6
1
8
OK
U