1. Manuals
  2. Brands
  3. treesse Manuals
  4. Swimming Pool
  5. Phantom PR1
  6. Operating and maintenance manual

treesse Phantom PR1 Operating And Maintenance Manual

Hide thumbs Also See for Phantom PR1:
Table of Contents

Advertisement

Quick Links

minipool
Phantom
PR1 - SP1
Operating and maintenance manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Phantom PR1 and is the answer not in the manual?

Questions and answers

Related Manuals for treesse Phantom PR1

Summary of Contents for treesse Phantom PR1

  • Page 1 minipool Phantom PR1 - SP1 Operating and maintenance manual...
  • Page 3 Dear Customer, We thank you for choosing a Treesse minipool and welcome you to our world of total wellness. We remind you that our products are manufactured with superb quality materials and are accurately tested in compliance with the provisions of the safety regulations in force.
  • Page 4 Introduction Phantom minipool We hope that the use of this minipool provides you with an experience of pure pleasure. If you have problems, contact your authorised dealer or the Manufacturer at one of the fol- lowing addresses: info@gruppotres.it www.gruppotreesse.it GRUPPO TRE S s.p.a. 01036 Nepi (VT) - Italy S.S.

  • Page 5: Table Of Contents

    USE ADVICE ___________________________________________________________________________ 8 TIME IN THE WATER ____________________________________________________________________ 8 CHROMATHERAPY _____________________________________________________________________ 8 ESSENCES AND BATH SALTS ____________________________________________________________ 9 Use Phantom PR1 MINIPOOL FUNCTIONS ____________________________________________________________ 11 CONTROL PANEL: HOW TO USE IT __________________________________________________ 15 ALARMS __________________________________________________________________________ 20 EMPTYING THE MINIPOOL ________________________________________________________ 22...

  • Page 6: Safety Instructions

    Phantom Safety instructions minipool GENERAL SAFETY INSTRUCTIONS Do not dive into the minipool: risk of serious personal injury and structural This manual has been prepared to help damage to the equipment. you get the most out of your minipool in a safe manner, avoiding circumstances that WARNING! could void the warranty.
  • Page 7 Safety instructions Phantom minipool SAFETY INSTRUCTIONS FOR More information MAINTENANCE HYPERTHERMIA Perform maintenance on your minipool Prolonged immersion in hot water may cause on a regular basis as this will maintain hyperthermia, a dangerous condition that oc- the surfaces and functional parts in optimal curs when the internal temperature of the body exceeds the normal value (37°C).

  • Page 8: Before Using The Minipool

    Concepts Phantom minipool BEFORE USING THE More information MINIPOOL... CHROMATHERAPY Read these chapters before using your new minipool. They will provide you with useful tips to use it safely with Light is made up of seven basic colours: red, orange, maximum benefit.

  • Page 9: Essences And Bath Salts

    Concepts Phantom minipool ESSENCES AND BATH SALTS More information Inside the minipool DO NOT use foaming detergents, soaps, bath oils, greasy lotions or products that are not Sweet orange essence compatible with the minipool. Otherwise, the water can Sweet orange essence is obtained from Citrus sinensis become oily or foamy and it could damage the paper dulcis, a plant of the Rutaceae family.

  • Page 10: Use Phantom Pr1

    Phantom minipool...

  • Page 11: Minipool Functions

    Phantom PR1 Phantom PR1 minipool minipool MINIPOOL FUNCTIONS 1 - Control panel 2 - Skimmer edge 3 - Pillow 4 - GHOST whirlpool 5 - PLUS whirlpool 6 - Seat blower (optional) 7 - Filling / draining plate 8 - Filter / air regulator compartment The minipool must ALWAYS remain connected to both the electrical grid and plumbing (filling and draining): this is necessary for filtering, cleaning the filters and maintaining the minipool's water levels and temperature.
  • Page 12 GHOST SYSTEM©, an exclusive patent of Treesse Group, owes its name to the invisibility of the components, fully incorporated in the bathtub. The system is distinguished by two thin internal perimeter slots that host a large number of jets that are properly oriented.
  • Page 13 Phantom PR1 minipool WHIRLPOOL REGULATION regulator (B) regulator (B) Using the you can control the air in the Using the you can control the air in GHOST whirlpool jets (perimeter whirlpool - back the GHOST PLUS whirlpool jets (perimeter whirlpool and legs).
  • Page 14 Phantom PR1 minipool CHROMATHERAPY The LED light moves the hydromassage in the pool. Phantom PR1 _standard in the upper hydromassage slots. - optional in the lower hydromassage slots. For this operation see page 17. OPTIONAL OVERFLOW EDGE The overflow edge of the minipool collects excess water and conveys it to the collection tanks under the bathtub.

  • Page 15: Control Panel: How To Use It

    CONTROL PANEL: HOW TO USE IT BASIC FUNCTIONS The minipool is powered on by connecting it to the mains. When switched on, the display will show the logo "treesse" and after a few seconds the display will show the current ambi- POWER ON ent temperature, and the various symbols on the keypad will be illuminated with white light.
  • Page 16 Phantom PR1 minipool OPERATIONAL FUNCTIONS The function can only be activated when the water level is sufficient. The minipool can be equipped with a blower motor that drives the nozzles seat. pressing the key starts the nozzles on the seat (default BLOWER duration 20 minutes).
  • Page 17 Phantom PR1 minipool OPERATIONAL FUNCTIONS Pressing the light key will activate a sequence of 16 col- ours that will vary in an automatic intermittence (for 2 hours by the light key and the keys turn blue default): and the symbol will appear on the display for 6 seconds.
  • Page 18 Phantom PR1 minipool SPECIAL FUNCTIONS HOW TO SELECT THE SPECIAL FUNCTIONS Pressing the "OK" key for more than three seconds accesses a submenu page on the display, where four more special functions are available. When accessing special functions, the "KEYPAD LOCK" icon is always lit by default.
  • Page 19 Phantom PR1 minipool SPECIAL FUNCTIONS This function provides access to a page where the hours of the day can be specified during which the control enters SILENCE operating mode (silent hours), when all the automatic activa- tions of the pumps and/or blowers are inhibited and only the antifreeze safety function remains active.

  • Page 20: Alarms

    Phantom PR1 minipool ALARMS If any alarms appear during initial startup, read the instructions provided in the following table. If the solution is not possible, immediately contact the Manufacturer to request technical support. In the meantime, do not try to repair or use the minipool but rather disconnect it from the electricity and water supplies.
  • Page 21 Phantom PR1 minipool ALARMS Screen DESCRIPTION OF THE PROBLEM NOTIFICATIONS displayed POSSIBLE SOLUTIONS Problem description: the notification is activated if the water level in- side the compensation tank is below the minimum for more than three seconds. The display will show the message "LL" alternating with the...

  • Page 22: Emptying The Minipool

    Phantom PR1 minipool EMPTYING THE MINIPOOL In general it is good practice to empty the  pool every 30 days, brushing the bottom and surfaces of the minipool and performing an energetic disinfection of the pipes, using the products contained in the SPA CLEANING KIT.

  • Page 23: Filling The Minipool

    AUTOMATIC FILLING USING THE KEYPAD Once the pool is powered, the display will show the word "treesse" and after a few seconds the display will show the current ambient temperature, and the various symbols on the keypad will be illuminated with white light.

  • Page 24: Use Phantom Sp1

    Phantom minipool...

  • Page 25: Minipool Functions

    Phantom SP1 minipool MINIPOOL FUNCTIONS 1 - Control panel 2 - Overflow edge 3 - Pillow 4 - Whirlpool GHOST (optional) 5 - Whirlpool PLUS 6 - Filling / draining plate 7 - Filter / air regulator compartment The minipool must ALWAYS remain connected to both the electrical grid and plumbing (filling and draining): this is necessary for filtering, cleaning the filters and maintaining the minipool's water levels and temperature.
  • Page 26 GHOST SYSTEM©, an exclusive patent of Treesse Group, owes its name to the invisibility of the components, fully incorporated in the bathtub. The system is distinguished by two thin internal perimeter slots that host a large number of jets that are properly oriented.
  • Page 27 Phantom SP1 minipool WHIRLPOOL REGULATION regulator (B) regulator (B) Using the you can control the air in the Using the you can control the air in GHOST whirlpool jets (perimeter whirlpool - back the GHOST PLUS whirlpool jets (perimeter whirlpool and legs).
  • Page 28 Phantom SP1 minipool CHROMATHERAPY The light “magically” moves the whirlpool in the bathtub. OPTIONAL Chromatherapy is optional on both the overflow edge and on the two perimeter slots. For the operation see page 30. OPTIONAL OVERFLOW EDGE The overflow edge of the minipool collects excess water and conveys it to the collection tanks under the bathtub.

  • Page 29: Control Panel: How To Use It

    Phantom SP1 minipool CONTROL PANEL: HOW TO USE IT chromatherapy activation key WHITE: chromatherapy NOT active BLUE: fixed colour FLASHING: colours in sequence bathtub fill/empty key WHITE: NOT active BLUE: filling in progress FLASHING: emptying in progress whirlpool activation (mild press) WHITE: NOT active BLUE: whirlpool in progress hidden key, not...
  • Page 30 Phantom SP1 minipool OPERATIONAL FUNCTIONS When turned on, the last temperature set by the user is loaded, which can be displayed by pressing the “ ” or “ ” key. To change it, press the “ ” or “ ” keys: this will increase/ decrease the displayed temperature by +/- 0.5°C.
  • Page 31 Phantom SP1 minipool SPECIAL FUNCTIONS Heater The heater is automatically activated when the water tem- perature in the minipool is one degree lower than the value set with the control panel. If not already active, the recirculation pump is automatically activated.

  • Page 32: Alarms

    Phantom SP1 minipool ALARMS If any alarms appear during initial startup, read the instructions provided in the following table. If the solution is not possible, immediately contact the Manufacturer to request technical support. In the meantime, do not try to repair or use the minipool but rather disconnect it from the electricity and water supplies. ALARMS Screen DESCRIPTION OF THE PROBLEM...
  • Page 33 Phantom SP1 minipool ALARMS Screen DESCRIPTION OF THE PROBLEM NOTIFICATIONS displayed POSSIBLE SOLUTIONS Problem description: in case of no communication with the chroma- therapy controller, the system disables the function and the display shows the "Co" message alternating with the temperature. Water control unit alarm The other functions remain available.

  • Page 34: Emptying The Minipool

    Maintenance Phantom SP1 minipool EMPTYING THE MINIPOOL In general it is good practice to empty the pool every 30 days, brushing the bottom and surfaces of the minipool and performing an energetic disinfection Do not leave the empty minipool in DIRECT of the pipes, using the products contained in the SPA SUNLIGHT.

  • Page 35: Filling The Minipool

    Maintenance Phantom SP1 minipool FILLING THE MINIPOOL Perform a preliminary cleaning of the minipool using a bit of water and a mild detergent. Do not use cloths or cleaners that are abrasive, aggressive or that contain solvents because they could irreparably damage the surface of the minipool.
  • Page 36 water treatment maintenance...
  • Page 37 Water treatment Phantom minipool INTRODUCTION Minipool water that is always clean and clear, but above all bacteriologically pure and free of algae, guarantees safety and comfort for users and offers the pleasure of a safe, relaxing bath. The pool water must always be disinfected and disinfectant and have a residual disinfectant content ready to elimi- nate any new contaminants that may be brought into the bathtub by people or the environment.
  • Page 38 Water treatment Phantom minipool TABLE OF ACTIVITIES Below is a table that summarises all the activities necessary for proper maintenance. Those in blue should be car- ried out frequently. INFORMA- ACTIVITY FREQUENCY... TION Why check: Minipool water that is always clean and clear, but above all CHECK PH VALUES, bacteriologically pure and free of algae, guarantees safety and comfort HARDNESS AND...

  • Page 39: Water Treatment And Maintenance

    Water treatment Phantom minipool CHECKING THE WATER PARAMETERS Specific studies on water balance have found a correla- CONVERSION TABLE tion of equilibrium among the values of pH, hardness, alkalinity: they must therefore be measured frequently °D = German degrees °f = French degrees and then balanced.
  • Page 40 Water treatment Phantom minipool The optimal values for incoming water are highlighted in the table: the three fundamental water parameters (pH, hardness and alkalinity) are frequently measured and then balanced using specific products, readily available in specialised stores. Minipools installed outdoors or subject to intensive use require more frequent checks of the three param- eters as they are subject to the weather (e.g., heat from the sun and rain) and organic substances carried into the water by users.

  • Page 41: Disinfection And Cleaning Of The Water

    Water treatment Phantom minipool DISINFECTION AND CLEANING OF THE WATER DISINFECTION Various micro-organisms (bacteria, fungi, algae) can proliferate in the water of the minipool, fostered by the ELIMINATION OF THE BACTERIAL AND FUNGAL LOAD) constant heat of the water. Only some of them can be a real danger for those who For a complete sanitisation of the water we recommend the use of bromine with reactivation using granular use the minipool, however these micro-organisms can...
  • Page 42 OZONE as they may cause cloudiness (e.g., suntan oil, lotions, cosmetics, etc.). TREESSE minipools come standard with an ozonator, Flocculant is a product that, when in contact with water, which helps to disinfect and purify the water, but we is hydrated and increases its volume. The hydrated mol- also recommend sanitising and maintenance treat- ecules "bind"...
  • Page 43 Phantom Water treatment minipool TREATMENT CALENDAR Use this calendar, making a copy of it if necessary, to note the days in which the treatments were done or when they are scheduled. When using multiple additives avoid using them at the same time (try to schedule the activities 2-3 days apart) and note their compatibility: read the information labels or request information from the product dealer.
  • Page 44 Phantom Water treatment minipool TREATMENT DATE DATE DATE DATE DATE DATE Disinfectant treatment: OXYGEN BROMINE SUPER-DISINFECTION Anti-algae treatment Flocculant Anti-foam treatment Anti-fat treatment Sequestering agent Parameter check Minipool water change TREATMENT DATE DATE DATE DATE DATE DATE Disinfectant treatment: OXYGEN BROMINE SUPER-DISINFECTION Anti-algae treatment...

  • Page 45: Cleaning The Paper Filter

    Phantom Maintenance minipool CLEANING THE PAPER FILTER Cartridge cleaning must be done after having switched off the minipool's main power. Cleaning/replacing the paper filter depends on how often the minipool is used. In general, rinse the cartridge every 2-3 weeks and replace it with every change of water. For cleaning just remove the cartridge from the filter and wash it with a jet of clean water to remove hair and other foreign substances.

  • Page 46: Non-Use Of The Minipool For Prolonged Periods

    Maintenance Phantom minipool NON-USE OF THE MINIPOOL Do not use garden hoses for rinsing so as not to fill the plumbing circuit with water again. FOR PROLONGED PERIODS 7 Dry the minipool with deerskin and protect it with In case of prolonged inactivity or at the end of the summer the optional cover.

  • Page 47: Cleaning The Minipool

    Cover the minipool when it is not in use (we recommend born stains (e.g., nicotine), it is possible to use car polish the optional Treesse cover). In addition to preserving the spread with cotton. surfaces, it maintains the water temperature, protects...

  • Page 48: Warranty Conditions

    Phantom Maintenance minipool WARRANTY CONDITIONS DISPOSAL AT END OF LIFE Under this warranty, the manufacturer will repair As per Legislative Decree no. 49 art. 13 dated 2014 "Im- or replace free of charge only the parts that have plementation of WEEE Directive 2012/19/EU on electric manufacturing defects.

  • Page 49: Troubleshooting

    Phantom Maintenance minipool Below are some problems you may encounter while using the minipool. If the solutions offered do not solve the problem contact your dealer or the minipool manufacturer for suggestions. PROBLEM POSSIBLE CAUSE SOLUTION • Water with unbalanced values •...
  • Page 50 Phantom Maintenance minipool PROBLEM POSSIBLE CAUSE SOLUTION Unstable pH value A very unstable pH could be caused Refer to the chapters: by a bad balance of total alkalinity page37 (Complete Alkalimetric Titre - CAT). • Water with unbalanced values Refer to the chapters: (hardness, pH, alkalinity).
  • Page 51 Maximum care has been paid to guarantee the accuracy of this manual. The Manufacturer reserves the right to modify the equipment or the documentation at any time, without notice. Therefore there might be small differences between this manual and the product you have received: we apologise in advance for any inconvenience. The total or partial reproduction of this manual without the Manufacturer's consent is prohibited.
  • Page 52 www.gruppotreesse.it GRUPPO TRE S s.p.a. 01036 Nepi (VT) - Italy S.S. Cassia km. 36.400 Settevene industrial area tel. (+39) 0761 527242 fax (+39) 0761 527223 info@gruppotres.it...

This manual is also suitable for:

Phantom sp1

Table of Contents

Save PDF