Operational Safety - Vector e-bike Manual

Operational Safety

Listed below are several things to keep in mind regarding the operation of the vehicle.
Whenever you are not using your Vector, put the key in the OFF position. It is easy to forget when it is
ON and an accident could occur when getting on or off the bike.
Similarly, to move the vehicle without riding it, make sure the key is in the OFF position.
In order to optimize the battery life and safety, when the Vector is not in use for more than 30 days, we
recommend:
- charging the battery up to 80% (80V).
- after charging, disconnecting the bike from the battery charger.
- If exceeding 30 days of storage with the bike disconnected, please connect it to the charger and charge
it up to 80% (80V) again.
In case you want to achieve the maximum performance of the Vector, we recommend you charge the
battery before the ride.
IF ANY ABNORMALITY OR DAMAGE ON THE BATTERY IS DETECTED, PLEASE CONTACT YOUR VECTOR
OFFICIAL DISTRIBUTOR.
If you do not follow the instructions for charging and storing the battery described in these operating
instructions you will lose the warranty on it. These guidelines have been rigorously tested to ensure the
maximum efficiency and durability of the battery.
FOLLOW THE INSTRUCTIONS FOR BATTERY CHARGING AND STORAGE.