Transmission: Chain And Bottom Bracket - Vector e-bike Manual

Transmission: Chain and Bottom Bracket

Check the wear on the gear rim and sprockets.
If you happen to notice that one of them has sprockets in poor condition (as indicated in the picture),
go to a Vector Official Service provider for a replacement.
Check the wear on the chain.
Periodically review the chain play. You must pull it carefully as indicated in the picture (for ease we
recommend doing this in the area of the chainring). If in doing so you can see at least half-a sprocket
of the drive chainring, go to a Vector Official Service provider for a replacement.
Clean and lubricate the chain.
Remove dirt from the chain after each use. It is very important to maintain a suitable level of grease
by regularly using appropriate products.