Table of Contents
Advertisement
Fig 36
1.
Hexagon bias nut can make various
angle adjustment in order to put fork
axle housing at proper position (angle).
2.
Some Invacare wheelchair use hexagon
bias nuts with fork stem bearing house,
pay attention on the angle of fork stem
housing must be maintain at 90
status in order to keep wheelchair moving
smoothly and go straight. While adjusting
seat height, remove wheels/castors
position. Be sure entire screws and nuts
were retighten before running wheel-
chairs.
Fig 37
Front caster 8" x 1".
Or 6" x 1" as an off-chair option as shown in Fig 37.
Fig 38
The rear wheels of C650 wheelchairs
all equipped with quick-release axle.
Fig 39
The rear wheel of C650 wheelchairs
can be adjusted forward or backward
with 2-3 positions.
Invacare Coastlite Manual Wheelchair Owner's Manual – page 17. May 2003
。
。
±1
Fig 38
Fig 39
Fig 36
Fig 37
Advertisement
Table of Contents
