Chicco TEDDY Instructions Manual page 19

2.2.7 General settings of Chicco Teddy APP:
To access the general settings menu, select the
icon in top left-hand corner in the home
screen.
You can change the language, select a sound for
alarms and alerts from those available in the de-
vice, reach the terms and conditions of use and the
information about the app.
Note: After closing the Teddy App as provided for by
the operating system of your device, Chicco Teddy
(or Teddy Distance Control) will emit a 10-second
acoustic signal.
2.2.8 Replacing the battery
The battery needs to be changed when the acoustic
alert is enabled on Chicco Teddy.
Remove the fastening screw on the back of the
device (fig.1), open the two sides with care by
lifting the front one (Fig.2) and remove the dead
battery by pushing it delicately in the direction of
the arrow (Fig.3).
Make sure to match the pole shown in the com-
partment when inserting the battery, pushing the
new battery (of the same model as CR2430 3V)
with care in the direction of the arrow (Fig.4) and
fit the front side again.
Fit the clip again if you have removed it and tight-
en the screw (Fig. 5 and 6).
After replacing the battery and opening the Chic-
co Teddy APP, you need to switch Chicco Teddy
on again by shaking it as shown in Fig. 7 until you
receive an acoustic alert. If already associated, the
app will automatically recognise the Chicco Teddy
when it is switched on again.
Technical data:
System Requirements:
- Android: compatibility with OS 4.4 and higher
- iOS: compatibility with OS 9.0 and higher
- We recommend checking in advance the com-
patibility of your device with the current version
of the App
- Communication Technology: Bluetooth Low
Energy
- Frequency band: 2.4-2.485GHz
- Transmission power: 2.51mW
- Power: Disposable and non-rechargeable 3V
CR2430 battery.
- Operating temperature: -20 °C +60 °C
SYMBOLS KEY
Instructions
WARNING!
Improper use may create hazardous
conditions.
WARNING.
Read the instructions for use.
Complies with relevant EC directives
1588
as amended
THIS PRODUCT COMPLIES WITH
EU DIRECTIVE 2012/19/EC.
The crossed bin symbol on the ap-
pliance indicates that the product, at
the end of its life, must be disposed of
separately from domestic waste, either
by taking it to a separate waste disposal site for electric
and electronic appliances or by returning it to your
dealer when you buy another similar appliance. The
user is responsible for taking the appliance to a special
waste disposal site at the end of its life. If the disused
appliance is collected correctly as separate waste, it can
be recycled, treated and disposed of ecologically; this
avoids a negative impact on both the environment
and health, and contributes towards the recycling of
the product' s materials. For further information regard-
ing the waste disposal services available, contact your
local waste disposal agency or the shop where you
bought the appliance.
CONFORMITY WITH EU DIREC-
TIVE 2006/66/EC AS AMENDED.
The crossed bin symbol on the bat-
tery or its packaging, means that the
batteries, at the end of their life, should be disposed
of separately from the municipal waste stream via
designated collection facilities appointed by the
government or the local authorities, or otherwise
returned to the dealer when purchasing new equiv-
alent rechargeable or non-rechargeable batteries.
Chemical symbols (Hg for mercury, Cd for cad-
mium, Pb for lead) printed beneath the crossed-out
wheeled bin symbol indicate the type of substance
contained in the battery. The user is responsible for
taking the batteries to special waste disposal sites
at the end of their life to allow for their processing
and recycling.
19