Teledyne Echotrac E20 Operator's Manual page 2

REVISION HISTORY
Version Date
8 25 Nov 2020
7 24 Jul 2020
6 16 Mar 2020
5 30 Oct 2019
4 5 Jul 2019
3 25 Jun 2019
2 3 Jun 2019
1 25 Mar 2019
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent
of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed
to be accurate and reliable, and may be subject to change without notice. The publisher will not accept
any liability for any consequence of its use. Publication thereof does not convey nor imply any license
under patent or other industrial or intellectual property rights.
Echotrac E20 Operator's Manual8
Version 8
2.3.3, table 4: Some details updated. Two Airmar transducers added (DF).
2.4, table 5: OCTANS > OCTANS TAH.
A.1: New no. for DFD document, and footnote added.
2.1: Power consumption: 100W > 50W. (also table 6 and hazardous voltage graphic in 4.2.1).
App. A.2: Figure 12 updated.
2.3.1: Expanded with UDP port.
2.4: Table 4 updated with Odom HM15-17 15kHz 17deg; unknow 15kHz; Kongsberg Simrad 38/200;
Airmar R509LM 28-60/80-130 NB; Airmar R509LM 28-60/80-130 WB.
4.4.1: Item e) added plus new screen shot.
4.4.2: Expanded with UDP details.
4.4.3: Expanded with NTP server (incl. new subsection) and Info box on multiple time sources active.
4.4.3.1: Revised.
NEW 4.4.3.2: NTP server for time synchronization.
4.4.3.3: Revised and expanded with UDP details.
5.2: Expanded to reflect extended UI layout/features with subsections for Mobilize modes for setup and
testing, and Survey modes for operation.
NEW 5.4: SBES UI BITE.
NEW 6.2: Marking.
8.1.3: Revised plus various new screen shots.
App. C heading expanded with "UDP".
App. C.1: Time status updated in Table 14 for Echotrac DBX.
1.3: Description of BITE updated.
2.1: Table 3 with specifications updated.
2.3.1: Heading corrected (Ethernet removed).
2.3.2: Elaborated with mention of main record types.
2.4: Five "unknown" single-frequency transducers added to list.
2.5: Table 5 with supported auxiliary sensors expanded.
2.6: Signed Declaration of Conformity added.
4.2.1: Sync connector updated in table 6.
4.2.2: Updated/elaborated front panel descriptions. Footnote added with cross-reference to 8.1.3.
4.3: Info box moved to section 4.3.4 on over the side-mount.
4.3.1: Warning added regarding safety of personnel and boat.
4.4.1: Instructions and information box about selection of generic "unknown" transducers added.
NEW 4.4.3: Time Synchronization.
5.2: Figure 8 updated.
NEW 5.2.1: Config Mode.
5.2.2: Elaborated description of automatic mode.
NEW 5.3: Standalone Operation.
8.1.2: Maintenance clarified.
8.1.3: Heading now: System Tool – E20 Software Update (was 8.1.4).
8.1.4: Recovery elaborated (was 8.1.3).
8.2: Footnote added about manufacturer's instructions.
B.3: Pin 3: PPS in
2.2.1: Cross-reference to App. C added; CV200 Heave removed.
7.3: Default COM port settings and tab name corrected.
NEW: App. C Serial Output String Formats.
0.4: PN 1012317-DK and 1012320-DK descriptions elaborated.
2.3: Supported transducers in table 3 updated and expanded.
0.4: PN 1014481-DK cable added; quantity changed to 2 for PNs 1012317-DK and 1012775-DK.
2.1: Ping rate updated.
A.2: Drawing of cable assy PARTD20639 added. Part numbers added to table and below drawings.
Initial release
© TELEDYNE RESON A/S 2019-2020
Uncontrolled Technology Subject to Restrictions Contained on the Cover Page.
Remarks
p. 2 of 60 November 25, 2020