Siemens SIMATIC MICRO-DRIVE Equipment Manual page 11

Documentation guide
SIMATIC Automation Tool
You can use the SIMATIC Automation Tool to perform commissioning and maintenance
activities simultaneously on various SIMATIC S7 stations and PROFINET devices as a bulk
operation independent of the TIA Portal. For example:
• Searching of the network and creation of a table showing the accessible devices in the
network.
• Flashing of device LEDs or HMI displays to locate a device
• Loading addresses (IP, subnet, gateway) to a device
• Downloading of the PROFINET name (station name) to a device
• Resetting of devices to factory settings (resetting interface parameters)
• Downloading of a firmware update to a device
You can find the SIMATIC Automation Tool on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/98161300).
PRONETA
SIEMENS PRONETA (PROFINET network analysis) allows you to analyze the plant network
during commissioning. PRONETA features two core functions:
• The topology overview automatically scans the PROFINET and all connected components.
• PRONETA also scans: configuration of the station name, IP subnet mask and identification
and maintenance data (I&M1..3)
You can find SIEMENS PRONETA on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/67460624).
10
Equipment Manual, 03/2021, A5E50502703-AA
PDC100(F)