Troubleshooting - Breville Infuser BES840 Instruction Book

Troubleshooting

PROBLEM
When the machine is
switched On, the STEAM/
HOT WATER lights is
flashing.
Coffee does not run
through
Coffee runs out too
quickly
POSSIBLE CAUSES
• STEAM/HOT WATER
dial is not in STANDBY
position
• Machine is not turned
On or plugged in
• Water tank is empty
• Coffee grind is too fine
• Too much coffee in the
filter
• Coffee tamped too
firmly
• The filter is blocked
• The coffee grind is too
coarse
• Not enough ground
coffee in the filter
• Ground coffee not
tamped firmly enough
WHAT TO DO
Turn the STEAM/
HOT WATER dial to
'STANDBY' position.
Machine will commence
normal heat up procedure.
Ensure the machine is
plugged in, switched On at
the power outlet and
the POWER button is
pressed On.
Refer to 'Filling The Water
Tank', page 10.
Ensure you use a suitable
espresso grind. Refer to
'The Grind' on page 16.
Refer to 'Coffee Dose &
Tamping', page 10 and 17.
Refer to 'Coffee Dose and
Tamping' on page 17.
Clean the filters. Refer to
'Cleaning The Filters',
page 24.
Ensure you use a suitable
espresso grind. Refer to
'The Grind' on page 16.
Refer to 'Coffee Dose and
Tamping', page 10 and 17.
Refer to 'Coffee Dose and
Tamping', page 17 .
25