Breville Infuser BES840 Instruction Book page 12

ADVANCED TEMPERATURE SETTING
The water temperature can be increased or
decreased by 1°C or 2°C if desired.
Coffee of different origins or roast profiles
may need a different espresso brew water
temperature to optimise their flavour. If your
espresso is tasting slightly "ashy" decrease
the brew water temperature by 1°C. If your
espresso is tasting slightly "sour" increase
your brew water temperature by 1°C.
INDICATOR
POWER
PROGRAM
DESCALE/CLEAN
HOT WATER
STEAM
To amend temperature settings:
• With the machine OFF, press and
hold the 1 cup button and then
simultaneously press and hold the power
button.
POWER
12
DESCRIPTION
DEFAULT TEMPERATURE
-2˚C
+2˚C
SELECT
-1˚C
+1˚C
PRESS & HOLD
• A beep will sound to indicate that
the temperature settings can now be
changed.
• The LED of the last saved setting will
be illuminated. See table on left.
• Pressing the 2 cup button to allows you
to toggle between the different settings.
• Please note that if the 2 cup button is not
pressed within 10 seconds, the machine
will return to STANDBY mode and the
above steps will have to be repeated
• After you have made a selection, 2 beeps
will sound to indicate that your setting
has been saved.
• The machine will then return to
STANDBY mode.
RESETTING DEFAULT VOLUMES
To reset the machine to the default 1 CUP
and 2 CUP shot volumes, press and hold the
PROGRAM button until the machine beeps
three times. Release the PROGRAM button.
The machine will return to its original
default setting.
NOTE
Default settings: 1 CUP shot volume is approx.
30ml. 2 CUP is approx. 60ml.