Breville Infuser BES840 Instruction Book page 23

CLEANING THE STEAM WAND
1 2
Run steam to clear milk Wipe steam wand after
from wand after texturing each use
• The steam wand should always be
cleaned after texturing milk.
• Wipe the steam wand with a damp cloth,
and then with the steam wand directed
back into the drip tray, briefly set the
steam dial to the STEAM position. This
will clear any remaining milk from
inside the steam wand.
• Ensure the steam dial is in the STANDBY
position. Press the POWER button to Off
and allow the machine to cool.
3 4
Clean hole with pin Remove tip
5
Soak tip overnight then
re-attach
• If the steam wand remains blocked,
use the pin on the cleaning tool to clear
the opening.
• If the steam wand continues to be
blocked, the tip of the steam wand can
be removed by using the spanner in the
middle of the cleaning tool.
• Unscrew the tip with the cleaning tool.
• Soak the tip in hot water before using
the pin on the cleaning tool to unblock.
Replace the tip back onto the steam
wand and secure with the cleaning tool.
23