IKEA RENODLAD Manual page 24

ENGLISH
Problem and alarm code
The program lasts too long.
The remaining time in the
display increases and skips
nearly to the end of pro-
gram time.
Small leak from the appli-
ance door.
The appliance door is diffi-
cult to close.
The appliance door opens
during the wash cycle.
Rattling/knocking sounds
from inside the appliance.
The appliance trips the cir-
cuit-beaker.
Possible cause and solution
• If the delayed start option is set, cancel the delay setting
or wait for the end of the countdown.
• This is not a defect. The appliance is working correctly.
• The appliance is not levelled. Loosen or tighten the ad-
justable feet (if applicable).
• The appliance door is not centred on the tub. Adjust the
rear foot (if applicable).
• The appliance is not levelled. Loosen or tighten the ad-
justable feet (if applicable).
• Parts of the tableware are protruding from the baskets.
• The AutoOpen is activated. This function opens the ap-
pliance door during the drying phase to improve the
drying performance and let the dishes cool down. The
door remains ajar.
– The duration of the drying phase and the door
opening time vary depending on the selected pro-
gram and options.
– When the AutoOpen opens the door, the display
shows the remaining time of the running program.
If you don't want the door to automatically open, deacti-
vate AutoOpen. Refer to "Settings".
• The appliance is not levelled. Loosen or tighten the ad-
justable feet (if applicable).
• The appliance is not levelled. Loosen or tighten the ad-
justable feet (if applicable).
• The tableware is not properly arranged in the baskets.
Refer to basket loading leaflet.
• Make sure that the spray arms can rotate freely.
• The amperage is insufficient to supply simultaneously all
the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian-
ces in use.
• Internal electrical fault of the appliance. Contact an Au-
thorised Service Centre.
24